“Ditch Witch” is the common name used for a walk-behind trencher. They’re used for digging small and narrow trenches, and they’re much faster and more convenient than digging the whole thing by hand. However, if you’ve not used a Ditch Witch before, you may not know how to handle one. This guide will look at how to use a Ditch Witch correctly.
Before You Begin
First, it’s important to check your dig zone to verify there aren’t any pipes or utility lines there. This goes for Ditch Witch digs and any other kind of trench digs. If you accidentally hit a power line or pipe, it could cause a serious accident. So, dial 811 to find out what’s beneath the surface. Alternatively, check out your state’s “Call Before Digging” website.
Using Your Ditch Witch
With the dig zone verified, you’re ready to get to work. Before you switch the machine on, read through the manual to figure out the basics. It’s also a good idea to inspect the Ditch Witch, ensuring that all fluids are topped up and that the relevant guards and shields are set up to protect you.
Make sure to clear out the area you plan to dig beforehand, too. Get rid of any obstacles in the way, like outdoor toys or furniture. Then, fire up your Ditch Witch according to
the instructions in the manual, shift it into forward drive, and move it to the start point for your trench.
With the Ditch Witch in place, move the drive into reverse. Also, set the chain depth to the desired level. Ditch Witch machines can typically dig down as far as 48 inches, but you might want a shallower trench of 12 or 20 inches, for instance.
Once the depth is set, lower the chain into the ground and throttle up. Then, with your hands tight on the Ditch Witch handles, walk backward, pulling the machine with you to dig your trench.
Key Takeaways:
- • The Ditch Witch was made to dig smaller trenches as bigger machines like steam shovels are unsuitable for small trenches.
- • A ditch witch can cut through asphalt and is a very cost-effective solution for fiber installation as well.
- • Ditch witch trench depths range anywhere from 12 inches to 48 inches, and they can rip uproots 2 inches in diameter.
“The Ditch Witch plow is the ideal, cost-effective solution for residential fiber installation, cable and lawn irrigation in tight spaces.”
Read more: https://findanyanswer.com/how-do-you-use-a-ditch-witch