You can save money by vacuuming often. You will extend your carpet’s life by vacuuming a lot and removing the dirt before it gets ground into the carpet. You can also save your carpet by doing spot cleaning. Just blot with a paper towel to dry it. Use mats and runners on high traffic areas to save your carpet. Have a no-shoe rule in your house to prevent dirt from being ground into your carpet. Rent a carpet cleaner and clean your own carpet. A professional can charge about $600 and it will cost you much less to do it yourself. Figure out what the square footage is that needs to be cleaned and compare it to the square footage that the professional wants to charge. Remeasure if there is a difference. Move your own furniture and save a few dollars. Clean only the traffic areas. It usually won’t get dirty underneath the couch. When your carpet is worn out, replace it with tile or wood flooring. The upfront cost is more but the new floors can last a lifetime.
- Use water and some dish detergent to spot clean soiled areas on your carpet.
- If you want your carpet to stay clean longer, do not allow people to wear shoes when they walk across it.
- Sometimes your carpet only needs to be cleaned in high traffic areas and not in areas underneath furniture.
“Dirt gets ground into the fibers if it isn’t removed quickly, so if you vacuum more often you’ll need professional carpet cleaning less frequently.”
Read more: https://www.thepennyhoarder.com/save-money/10-ways-to-save-money-on-carpet-cleaning/
An automatic floor scrubber can be a very good investment for your commercial property. It is a lot easier to use a floor scrubber than doing the floors manually. A floor scrubber can do the work better and faster. It can cover 23,000 square foot in an hour so it is much faster. You have to prepare the floor to be scrubbed by removing all the furniture and other things that will be in the way. Make sure that the machine is properly charged and that it works and it doesn’t leak.
- A power scrubber is a smart and economical purchase that improves the efficiency of employees
- Always ensure the machine is fully charged before utilizing it to clean large surfaces
- Creating educational materials on how to properly work the machine ensures all users are successful
“While this machine is convenient, you should know how to use it properly to ensure efficient operation.”
Read more: https://minutemanintl.com/properly-use-floor-scrubber-maximize-cleaning-power/
The thick, brittle nature of ceramic requires a special saw to cut. A wet tile saw, with its somewhat dull, non-serrated blade, is suited to the task. Table-mounted and portable, wet tile saws can trim tile edges on site. This type of saw features a diamond-cutting blade and water pump and reservoir. Jobs such as kitchen counter replacement are where tile saws come in handy.
- Tiles saws that use water allow them cut repeatedly cut through thick, brittle, dry ceramic tile with ease.
- Tile saws with motor and water pump allow continuous cutting that does not slow down a job.
- The type of blade on a tile saw makes a big difference in how efficiently it cuts. A diamond blade is a must-have to handle larger jobs.
“An ordinary circular saw for wood or metal would either break the tile or get so hot that it would seize up and stop cutting.”
Read more: https://www.streetdirectory.com/travel_guide/32443/home_improvement/different_uses_for_a_tile_saw.html
A french drain is a type of system that removes excess water from homes. Ditches are built with a pipe and some gravel which allow the water to drain out. If you are trying to build a french drain, the first thing to look at is where the best drainage route is. You’ll need to build a trench in order to install the piping and you’ll want the excess water to not ruin your yard. You also don’t want soil to block the drainage pipe either.
- There are many issues relating to drainage and water damage that cause homeowners to consider different methods to drain and divert water away from their homes such as installing a French Drain.
- A French Drain is a ditch that can be dug in which gravel and a pipe can be positioned that slopes away from the building allowing water to successfully drain properly.
- Many choose to lay additional landscape fabric over the top to prevent soil from blocking the drainage pipe.Read more at Gardening Know How: What Is A French Drain: Information On Installing French Drains In Landscapes https://www.gardeningknowhow.com/garden-how-to/soil-fertilizers/what-is-a-french-drain.htm
“Choosing a professional to install a French drain will ensure proper installation, as well as reduce the risk of damage to oneself or the property.”
Read more: https://www.gardeningknowhow.com/garden-how-to/soil-fertilizers/what-is-a-french-drain.htm
Stone fruit trees need bees and other insects to insure they are pollinated. However, sometimes they require a human to hand pollinate. Some trees can be pollinated with their own pollen, though stone fruit trees do not fit in this category. To hand pollinate, it is essential to know the stamen from the stigma. Pollination occurs when the pollen is transferred from the tip of the stamen to the sticky crown of the stigma. One way to do this is to collect the pollen with a cotton puff or paint brush. This should also be done in spring once the blossoms are open.
- Some trees do not self-pollinate, and lack the bees to pollinate them. They must be pollinated by hand.
- Self-pollinating is not particularly uncommon. Farmers will pollinate by hand to ensure a large harvest.
- Cotton swabs and Q-tips are effective for transferring pollen between blossoms.
“To pollinate stone fruits by hand, you need to make like a bee, transferring pollen from the tip of a stamen to the sticky crown of the stigma.”
Read more: https://www.gardeningknowhow.com/edible/fruits/fegen/stone-fruit-hand-pollination.htm
Edging a flower bed or a garden is one of the easiest ways to make your landscape look a lot more attractive. First you need to pick an edging tool that will allow you to dig into soil efficiently. Next you are to mark the edge of your flower bed or garden and start to create the edge by digging the soil. Finally, you can finish the edge with mulch or even brick edging. It is best to ask a professional for their advice before you actually finish the edging though. Finally, maintain the edge weekly.
- Pick an edging tool and use this to start digging through your soil/dirt.
- Create the edge of your bed by marking the edge first and then digging into the mark.
- Finish the edge and if you’re unsure of how to do so, ask a landscaper for their opinion.
“That’s why Marchiafava recommends working with an experienced landscaper. “It’s a good idea to have a professional create the initial edge,” he says. From there, edging can keep its look with simple maintenance.”
Read more: https://www.angieslist.com/articles/how-edge-flower-bed.htm